When something goes wrong with the electrical system, there is usually a moment that tips the decision: a breaker that trips for the third time in a week, an outlet that stopped working after a storm, a panel that buzzes whenever the air conditioning kicks on. That is when people in Fontana call. C & C Electrical Services handles the full range of residential and commercial electrical work in this city, from a single dead outlet to a complete service upgrade, and work is carried out by licensed electricians on every job.
Fontana is a large city with a wide mix of housing and commercial property, and the electrical calls we get here reflect that. Older homes on circuits that were never meant to carry today's loads sit alongside newer construction that needs EV charger wiring, solar interconnects, and panel capacity for battery storage. Apartment buildings, commercial spaces, and multi-unit rental properties all generate their own kind of electrical work. Whatever the setting, the process is the same: we diagnose the problem, explain what we found, and handle the fix.
Working across Fontana means encountering every kind of panel and circuit, and a city this size brings a wide range of job types through the door. Repairs and troubleshooting, panel upgrades, outlet and lighting installation, wiring, EV chargers, generator hookups, and safety inspections are all part of what we do here. The work below represents the specific job types that come up most often on a Fontana call.
An electric range, wall oven, or dryer needs a dedicated 240-volt circuit sized for the appliance. If the circuit is missing, undersized, or wired to an outlet that no longer meets code, we run a new one from the panel. This comes up constantly in Fontana when a household upgrades from a gas range to electric, or when a laundry room is being finished for the first time.
Lighting installation covers new recessed fixtures, LED retrofits, outdoor security lighting, and motion-sensor fixtures for driveways and entries. Where a fixture is going somewhere that has never had one, we run the wiring and confirm the circuit can carry the load before anything goes in the ceiling.
A safety inspection is worth scheduling before a home purchase, before a tenancy begins, or when a property has not had a licensed electrician through it in some time. We check the panel, grounding and bonding, arc-fault and ground-fault breaker coverage, and the condition of visible wiring. The report gives you a clear picture of what the system looks like and what, if anything, needs attention.
A whole-home surge protector installs at the breaker panel and intercepts voltage spikes before they reach circuits and connected equipment. In a region where summer electrical loads are heavy and utility fluctuations are part of the picture, panel-level surge protection is one of the more practical upgrades a homeowner or landlord can add.
Workshop equipment draws more than a standard circuit can supply. A welder, air compressor, or heavy shop tool needs a dedicated circuit sized for its actual load, and in some cases a subpanel installation makes more sense than running multiple circuits back to the main panel. We run the load calculation first and size the circuit or subpanel accordingly.
A generator that is not connected through a proper transfer switch is a hazard to the people working on the utility line outside. We install transfer switches sized to the circuits that matter most, wire the generator connection cleanly, and make sure the hookup meets code. This is not a shortcut job, and we do not treat it as one.
Choosing the right electrical fix is easier than it sounds, and so is understanding how the price is put together. When you call, we ask about what you are seeing, where in the property the problem is, and what the panel looks like if that is relevant. That conversation lets us give you a rate on the phone before anything is scheduled.
What changes a quote is scope. A straightforward outlet repair is a different job from running a new circuit through finished walls to a subpanel that also needs a breaker added. A panel that needs a load calculation, a service-entrance upgrade, and permit coordination is priced differently from a panel where only a breaker is being replaced. We explain what the job covers and what the rate includes before we confirm a visit. If the scope changes once the panel is open or the walls are accessed, we tell you before we proceed.
Permits are part of the job where the work requires them. We handle the documentation and coordinate the inspection. That is included in how we scope the work, not an afterthought.
We keep you informed from diagnosis to final test, so there are no surprises in how the job is communicated.
The hardest part of an electrical problem is knowing when to call, and some situations answer that question for you. A burning smell near an outlet or panel, a breaker that will not reset, visible scorching on a switch plate, or a complete loss of power to part of the property are all situations that need attention the same day.
We are available every day from 8:30 AM to 10:00 PM, and same-day scheduling is available when the calendar allows. For repairs that cannot wait, calling early in the day gives the best chance of a same-day visit. For businesses and rental properties where a circuit going down means a space going offline, we work around what the property needs rather than a rigid window.
If a tenant needs to be present instead of the owner, that is straightforward to arrange on the call. We confirm access before we show up so the visit does not stall at the door.
You schedule it. We power it. Simple as that.
If you've never hired an electrician before, it helps to know that no two calls are quite the same, even when the job type looks identical on paper. The service page carries the full breakdown of what each type of work involves. What follows is how the work actually divides across the kinds of properties we see in Fontana.
A repair call usually starts with something the customer has been living with longer than they should. Flickering lights, a circuit that trips under load, an outlet that stopped working after a surge. We trace the fault to its source rather than swapping parts and hoping. That means checking connections, testing GFCI and AFCI protection, verifying grounding and bonding, and confirming that what we find matches what the panel says it should be. The fix follows the diagnosis, not the other way around.
Fontana has a wide range of housing stock, and older homes in this city often carry panels that were sized for a much lighter load than today's households draw. Add a solar system, an EV charger, and central air running through a long summer, and an undersized panel becomes a real constraint. We perform load calculations before any upgrade is quoted, handle 200-amp and higher service upgrades, and coordinate the service-entrance and meter work when the utility requires it. Subpanel installation is available when a detached structure or a workshop needs its own feed.
Installation work in a city this size covers a wide range: EV charger circuits for homeowners and tenants, dedicated circuits for appliances and workshop equipment, outdoor lighting and weatherproof outlets, ceiling fans, recessed lighting, and smart switches. The common thread is that every installation starts with a check of what the panel can support and whether the existing wiring can carry the new load. We do not skip that step.
We keep your home powered and safe.
Landlords and property managers in Fontana book electrical work differently from owner-occupants, and we work with both. If you are managing a rental, we can coordinate access with the tenant directly so you do not have to be on-site. The invoice goes to whoever is responsible for the work, and that is confirmed on the call before the visit is scheduled.
After the job is complete, we walk through what was found and what was done. If a permit was pulled, the inspection record is part of the job file. Landlords who need documentation for a compliance record or a prospective tenant get a clear account of what was replaced, what was repaired, and what the system looks like now. Work carried out by licensed electricians means that record carries weight.
If something is not right after the work is done, call us. We address it.
Call and we'll handle the lights, outlets, and panel.
We cover Fontana and the surrounding communities throughout this part of San Bernardino County. Rialto, Bloomington, Rancho Cucamonga, Muscoy, and Jurupa Valley are all part of the area we work. Whether the property is in Fontana or a neighboring city, the process is the same: a call, a rate on the phone, and a licensed electrician at the door.
You're talking to someone who knows the area and the homes in it. The electrical work in this part of the Inland Empire has its own character, and we have seen most of it.
In most cases, yes. We assess what can be isolated and what cannot before the work begins, and we plan the job around keeping the rest of the property operational where that is possible. For work that requires a full shutdown, we schedule it at a time that minimizes disruption, and we confirm that plan with whoever is responsible for the property before the visit.
We assess the main panel for available capacity, then run a circuit or a subpanel feed to the garage depending on the load it needs to carry. The wiring method depends on whether the run is overhead or underground. We handle the full scope from the main panel to the final connection in the structure.
Older homes in this city frequently have panels that were sized for a lighter load than today's households draw, outlets that lack GFCI protection in kitchens and bathrooms, and wiring that has not been assessed since the original installation. Aluminum branch-circuit wiring shows up in homes built during a particular period and requires specific remediation rather than standard repair. An electrical safety inspection gives you a clear picture of where the system stands.
The wiring side is our work. Running the dedicated circuit, installing the disconnect, and making sure the panel has the capacity to carry the load are all electrical tasks we handle. The equipment itself, meaning the air conditioning unit, heat pump, or furnace, is the HVAC trade's territory, and we do not install or service that side.
We work around the site schedule and communicate with whoever is managing the project. Electrical rough-in needs to happen before drywall goes up, and trim-out happens after. If the schedule is tight, we confirm the sequence on the call so the electrical work does not hold up the other trades.
Permit requirements depend on the type of work and where it is being done. Panel replacements, service upgrades, and new circuit installations typically require a permit and inspection. We handle the permit process as part of the job and coordinate the inspection so you do not have to manage it separately.
In many cases, yes. When a panel upgrade or rewiring project allows for phased work, we plan the sequence to keep as much of the home live as possible during the job. We discuss what is practical for your specific situation on the call before the work is scheduled.
A typical small office fit-out involves assessing the panel for available capacity, running circuits for workstations and equipment, adding outlets where they are needed, and installing lighting appropriate to the space. If the load is significant, a subpanel or service upgrade may be part of the scope. We confirm the full picture on the call before anything is scheduled.
We assess the wiring and document what we find. If the damage is electrical in nature, we explain what caused it based on what the inspection shows. We do not speculate about what another trade did or did not do, but we can tell you what the wiring condition is and what it will take to correct it.
We are available every day from 8:30 AM to 10:00 PM. If the work needs to happen outside normal business hours to avoid disrupting operations, we discuss what is possible within that window when you call to schedule.
If something in the electrical system is not right, the call is the right first step. C & C Electrical Services gives you the rate on the phone, confirms what the job covers, and schedules the visit without a form to fill out or a wait for a callback.
Call (442) 419-3289. We're available every day from 8:30 AM to 10:00 PM.
Schedule it. We wire it. You're powered.
We also work in: Rialto, Rancho Cucamonga, Colton, San Bernardino, Highland. See the whole of our full list of communities.
Below is a quick look at the electrical work we handle across Fontana and the surrounding high desert. Every service listed is work we perform on the electrical side: wiring, circuits, panels, and the connections that keep a home or business running. Use this as a starting point, then call us and we will walk through exactly what your job involves.
| Service Type | What's Included | Common Situations | Good to Know |
|---|---|---|---|
| Lighting Installation |
| homeowners adding or replacing interior and exterior lighting | If a fixture is going somewhere it has never been, we run the wiring and confirm the circuit can carry the load before the fixture goes up. |
| Outdoor & Misting-System Circuits |
| patios, outdoor kitchens, and misting systems common in high-desert climates | UV exposure and temperature swings in the high desert affect how outdoor wiring is installed. We match the materials to the environment. |
| Electrical Panel Upgrades |
| homes adding solar, an EV charger, central air, or heavy workshop loads | Every upgrade starts with a load calculation so the new panel is sized for what the home actually draws, not just what it draws today. |
| Solar & Battery Installation |
| Fontana homeowners adding solar generation or battery storage | The high-desert sun produces strong generation numbers. We handle the electrical infrastructure so the system is ready to perform safely from day one. |
| Electrical Repairs & Troubleshooting |
| any home or business with an unexplained electrical problem | We trace the fault to its source before touching anything. Swapping parts without a diagnosis often misses the real cause. |
| Pool & Spa Wiring |
| homeowners installing or servicing a pool, spa, or hot tub | Pool and spa wiring carries specific code requirements for bonding and GFCI protection. Work carried out by licensed electricians who know those standards. |
| EV Charger Installation |
| EV owners who want a reliable home charging setup instead of relying on public stations | We check the panel before we run the circuit. If an upgrade is needed first, we include that in the scope so nothing gets undersized. |
| Ceiling Fan Installation |
| rooms without a ceiling fan or with an existing fixture being replaced | A fan that needs a new circuit or a switched outlet where there was none before is a straightforward job when it is set up correctly from the start. |
| Breaker & Fuse Repair |
| homes where a breaker trips under normal load or refuses to reset | A breaker that trips repeatedly is telling you something. The fix may be the breaker itself, or it may be the circuit load. We check both. |
| Electrical Safety Inspections |
| homebuyers, landlords, and owners of older properties | We walk you through every finding before we leave. You will know what was checked, what needs attention, and what is in good shape. |
| Wiring & Rewiring |
| older homes with aging wiring or homebuyers wanting an inspection before closing | We assess what is in the walls before recommending a scope. Not every older home needs a full rewire, and we will tell you honestly what does and does not need attention. |
| RV Hookups |
| homeowners who store an RV and want a proper shore-power connection at home | A properly wired RV hookup uses a dedicated circuit sized for the rig. We confirm the panel has room and run the circuit to the right spot on the property. |
| Outlet & Switch Installation |
| kitchens, bathrooms, garages, and outdoor areas needing code-compliant receptacles | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. We confirm coverage and add it where it is missing. |
| Whole-Home Surge Protection |
| homes with sensitive electronics, solar systems, or older wiring exposed to utility fluctuations | The high desert sees summer lightning activity and periodic utility events. A panel-level unit catches a spike before it reaches any circuit in the home. |
| Dedicated Appliance Circuits |
| homeowners adding a major appliance or workshop equipment | Sharing a circuit with a high-draw appliance causes nuisance trips and can damage the equipment. A dedicated circuit solves both problems. |
Call us at (442) 419-3289 to talk through your job and get a price before anything is scheduled.
(442) 419-3289