When something goes wrong with the wiring in a Highland home, the first thing most people want is a straight answer. C & C Electrical Services sends a licensed electrician to your door, and the first thing that happens is a conversation, not a repair. You hear what was found, what it means, and what the fix involves before any work begins. That process does not change whether the call is for a tripped breaker, a dead outlet, or a panel that has been struggling under load for years.
We work across Highland and the surrounding area, covering everything from routine repairs to full service upgrades and dedicated circuit installation. Work is carried out by licensed electricians on every job. We are available every day from 8:30 AM to 10:00 PM, and same-day scheduling is available when a problem will not wait. Call (442) 419-3289 for a quote, and you will have the rate on the phone before anything is scheduled.
The calls we take in a city like Highland do not all look the same. A house built decades ago carries different problems than a newer build wired for today's loads. A landlord managing a rental unit has different priorities than a homeowner who just added a workshop in the garage. The situation that leads to the call shapes everything about how the job gets done.
Most calls start with something that does not look serious: a light that flickers, an outlet that stopped working, a breaker that trips when the air conditioning kicks on. The problem is that those symptoms do not always point to where the fault actually lives. We trace the circuit, test the connections, and find the source before we touch anything. A repair done on the wrong part of a circuit is not a repair. We keep you informed from diagnosis to final test, so you know exactly what was found and what was done.
Older homes in Highland often carry electrical panels that were adequate when they were installed but are not sized for what a household draws today. Add a central air conditioning system, an EV charger, a solar inverter, and the ordinary load of modern appliances, and a 100-amp panel runs out of room. We perform load calculations before any upgrade is quoted, so the new panel is sized for what the home actually needs, not just what it currently has. Permit work is part of the job where it is required.
New outlets, new lighting, a ceiling fan where there was none, a dedicated circuit for a range or a dryer: these are the jobs that come up when a home is being updated or when a new appliance arrives and the existing wiring is not ready for it. A dedicated circuit keeps a high-draw appliance from sharing a circuit with general outlets and causing nuisance tripping. We size the circuit to the load and wire it correctly from the panel out. The service page carries the full breakdown of what we handle.
Apartments and multi-unit buildings in Highland have their own electrical picture. The panel for an individual unit is sometimes inside the apartment and sometimes in a shared hallway or utility room. In older buildings it may be a smaller subpanel fed from a main panel that serves the whole building, and that main panel is typically the landlord's or the building owner's responsibility, not the tenant's.
If you are a tenant and you are dealing with a problem inside your unit, such as a dead outlet, a tripping breaker, or a light fixture that has failed, that work falls on the wiring within your space and is worth a call. If the problem is upstream of your unit's panel, the building owner or property manager needs to be part of the conversation. We can help you work out which side of that line the fault sits on.
Where a unit has been rewired or updated at some point, the wiring inside may not match what the building's original installation looked like. That sometimes means circuits that are not labeled correctly, protection that is missing where code now requires it, or outlets that were added without a proper circuit behind them. A straightforward inspection of the panel and the outlets inside the unit will tell you what you are actually working with.
Same-day scheduling is available when the schedule allows, and we prioritize calls where the problem is affecting a home's ability to function. A breaker that will not reset, an outlet that is warm to the touch, a circuit that has gone dead without an obvious cause: these are not situations to leave until next week. Call (442) 419-3289 and describe what you are seeing. We will tell you how quickly we can get someone out.
For businesses and rental properties that have to stay operational, we work around the situation. If a circuit serving a critical area needs to be repaired, we assess what can be isolated and what needs to stay live, and we plan the work accordingly. The goal is to get the problem fixed without turning a repair into a bigger disruption than it needs to be.
We are available every day from 8:30 AM to 10:00 PM. That window covers most of the situations where a problem shows up outside a standard weekday, and it means a homeowner who notices something wrong on a Sunday evening still has a path to getting it handled.
Upgrading from 100-amp to 200-amp service, or higher, is one of the more common jobs we handle in the region. The process starts with a load calculation to confirm what the home draws at peak and what headroom is needed for anything being added. From there, we replace the panel, handle the service entrance work, and coordinate the utility connection where that is required. Nothing gets sized by guesswork.
A detached garage or a shed that needs power requires its own feed from the main panel, either a dedicated circuit for light use or a subpanel for a workshop that draws more. Electric gate operators need a dedicated circuit and the right outlet for the controller. We run the wiring, size the circuit to the load, and make sure the installation meets code for an outdoor or detached structure. Work carried out by licensed electricians means the installation holds up to inspection.
Recessed LED lighting, ceiling fan installation, fixture replacement, and under-cabinet lighting are all jobs that involve more than swapping a bulb. A new recessed layout needs circuits sized and run to support the fixtures without overloading an existing circuit. A ceiling fan going where there was no fan before needs a box rated for the weight and a switched circuit that handles the load. We handle the wiring behind the installation, not just the fixture itself.
Intermittent faults are the hardest electrical problems to pin down. A breaker that trips on some days but not others, a light that flickers only when a specific appliance is running, an outlet that works until the circuit is under load: these take more than a visual check. We test under load conditions, check connections throughout the circuit, and look at the panel to see whether the problem is local to one outlet or branch, or whether it points to something further upstream. We'll find the fault and fix it right.
The rate is confirmed on the phone before a visit is scheduled. We ask you to describe what you are seeing, where the problem is, and whether any recent work was done on the panel or the wiring. That information lets us give you a realistic price on the call rather than a range that does not tell you much.
If the scope changes once the panel is open or the walls are accessible, we tell you before we proceed. The price is not adjusted after the fact without your knowledge. What you were quoted is what the conversation is based on, and any change to the scope is a conversation, not a line item that appears on the bill.
Some jobs are straightforward to price on the phone: outlet replacement, ceiling fan installation, a dedicated circuit for a specific appliance. Others, like a fault that has not been diagnosed yet or a panel that has not been assessed, need a site visit before the full scope is clear. In those cases, we explain what the visit will cover and what it will cost before we confirm the appointment.
You're talking to someone who knows the area and the homes in it.
We cover Highland and the communities around it throughout the area. Redlands, Mentone, Loma Linda, Running Springs, and San Bernardino are all part of the territory we work in regularly. If you are in any of these communities and need electrical work handled, the process is the same: call, get a rate on the phone, and schedule a visit.
San Bernardino County covers a wide range of housing types and ages, and the electrical work that comes out of it reflects that. We handle what the area actually needs, from older homes that have not had their wiring touched in decades to newer builds where the panel needs to be expanded to carry a solar system or an EV charger. We keep your home powered and safe.
We assess the wiring and document what we find. If the damage is electrical in nature, we explain what caused it based on what the inspection shows. We do not speculate about what another trade did or did not do, but we can tell you what the wiring condition is and what it will take to correct it.
Homes that have not had significant electrical work done in several decades tend to show up with panels that are undersized for today's loads, outlets that lack GFCI protection in kitchens and bathrooms, and wiring that has been extended or modified without a proper circuit behind it. Aluminum branch-circuit wiring is also present in some homes from a particular era, and it needs specific remediation rather than standard copper repair methods. A panel and outlet assessment will tell you quickly where the gaps are.
Yes. If the property owner, a property manager, or another party needs a copy of the job documentation, we can direct it accordingly. Let us know on the call who should receive it and we will make sure the right person gets the record.
We are available every day from 8:30 AM to 10:00 PM. If the work needs to happen outside normal business hours to avoid disrupting operations, we discuss what is possible within that window when you call to schedule.
A typical small office fit-out involves assessing the panel for available capacity, running circuits for workstations and equipment, adding outlets where they are needed, and installing lighting appropriate to the space. If the load is significant, a subpanel or service upgrade may be part of the scope. We confirm the full picture on the call before anything is scheduled.
If the work requires access to the loft or attic, we need a clear path to reach the area safely. We let you know on the call if access preparation is part of what the job requires, so you are not caught off guard on the day.
We work with what the job requires. If matching an existing style or finish matters to you, let us know on the call. In most cases standard outlet and switch styles are straightforward to match. For specific fixture styles, we discuss options before anything is ordered or installed.
Yes. A full rewire is only recommended when the existing wiring cannot be safely extended or repaired. In many older properties we can address specific circuits, outlets, or panels without touching the rest of the wiring, and we explain the options before any work is scoped.
Permit requirements depend on the scope of the work and sometimes on whether the installation is inside the property or affects the service entrance. We confirm what applies to your specific job before we schedule anything, and where a permit is required, pulling it is part of what we do, not an extra step you have to manage separately. The inspection that follows a permitted job is also part of the process, and we plan the work around it.
Yes. We provide documentation of what was found and what was done on every job. If the work involved a permit, the inspection record is part of that documentation. A copy can be directed to a property manager or letting agent if that is easier than routing it through the owner.
The outlet that has been dead for two months, the panel that trips every time the air conditioning runs hard, the ceiling fan that never got wired in after the last renovation: these do not fix themselves. Today is as good a day as any to get a price and put something on the schedule.
Call C & C Electrical Services at (442) 419-3289. We are available every day from 8:30 AM to 10:00 PM. You get the rate on the phone, and you decide from there.
You schedule it. We power it. Simple as that.
We also work in: Redlands, San Bernardino, Colton, Rialto. See the whole of our full list of communities.
Below is a quick look at the electrical work we handle across Highland and the surrounding high desert. Every service listed is work we perform on the electrical side: wiring, circuits, panels, and the connections that keep a home or business running. Use this as a starting point, then call us and we will walk through exactly what your job involves.
| Service Type | What's Included | Common Situations | Good to Know |
|---|---|---|---|
| Lighting Installation |
| homeowners adding or replacing interior and exterior lighting | If a fixture is going somewhere it has never been, we run the wiring and confirm the circuit can carry the load before the fixture goes up. |
| Outdoor & Misting-System Circuits |
| patios, outdoor kitchens, and misting systems common in high-desert climates | UV exposure and temperature swings in the high desert affect how outdoor wiring is installed. We match the materials to the environment. |
| Electrical Panel Upgrades |
| homes adding solar, an EV charger, central air, or heavy workshop loads | Every upgrade starts with a load calculation so the new panel is sized for what the home actually draws, not just what it draws today. |
| Solar & Battery Installation |
| Highland homeowners adding solar generation or battery storage | The high-desert sun produces strong generation numbers. We handle the electrical infrastructure so the system is ready to perform safely from day one. |
| Electrical Repairs & Troubleshooting |
| any home or business with an unexplained electrical problem | We trace the fault to its source before touching anything. Swapping parts without a diagnosis often misses the real cause. |
| Pool & Spa Wiring |
| homeowners installing or servicing a pool, spa, or hot tub | Pool and spa wiring carries specific code requirements for bonding and GFCI protection. Work carried out by licensed electricians who know those standards. |
| EV Charger Installation |
| EV owners who want a reliable home charging setup instead of relying on public stations | We check the panel before we run the circuit. If an upgrade is needed first, we include that in the scope so nothing gets undersized. |
| Ceiling Fan Installation |
| rooms without a ceiling fan or with an existing fixture being replaced | A fan that needs a new circuit or a switched outlet where there was none before is a straightforward job when it is set up correctly from the start. |
| Breaker & Fuse Repair |
| homes where a breaker trips under normal load or refuses to reset | A breaker that trips repeatedly is telling you something. The fix may be the breaker itself, or it may be the circuit load. We check both. |
| Electrical Safety Inspections |
| homebuyers, landlords, and owners of older properties | We walk you through every finding before we leave. You will know what was checked, what needs attention, and what is in good shape. |
| Wiring & Rewiring |
| older homes with aging wiring or homebuyers wanting an inspection before closing | We assess what is in the walls before recommending a scope. Not every older home needs a full rewire, and we will tell you honestly what does and does not need attention. |
| RV Hookups |
| homeowners who store an RV and want a proper shore-power connection at home | A properly wired RV hookup uses a dedicated circuit sized for the rig. We confirm the panel has room and run the circuit to the right spot on the property. |
| Outlet & Switch Installation |
| kitchens, bathrooms, garages, and outdoor areas needing code-compliant receptacles | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. We confirm coverage and add it where it is missing. |
| Whole-Home Surge Protection |
| homes with sensitive electronics, solar systems, or older wiring exposed to utility fluctuations | The high desert sees summer lightning activity and periodic utility events. A panel-level unit catches a spike before it reaches any circuit in the home. |
| Dedicated Appliance Circuits |
| homeowners adding a major appliance or workshop equipment | Sharing a circuit with a high-draw appliance causes nuisance trips and can damage the equipment. A dedicated circuit solves both problems. |
Call us at (442) 419-3289 to talk through your job and get a price before anything is scheduled.
(442) 419-3289