Homeowners in Highland call about the same things homeowners everywhere call about, until the house tells them something else is going on. A breaker trips and resets fine, then trips again a week later. An outlet stops working and there is no obvious reason. A ceiling fan that ran without complaint for years starts flickering when the air conditioner kicks on. Those calls are where most of the work starts, and they are where we start too.
Businesses and rental properties add their own layer. A landlord needs a unit brought up to code before a new tenant moves in. A property manager needs a repair scheduled without pulling the tenant out of their day. A small business needs a circuit added for new equipment without taking the whole shop offline. We handle all of it, and we take calls from 5:30 AM to 10:30 PM every day of the week.
Call (442) 419-3289 to describe what you are dealing with and get a price before anything is put on the schedule.
Getting a job booked starts with a phone call. You describe the situation, we scope what the work involves, and you get a price before a visit is confirmed. If the job needs a look before we can firm up the number, we say that on the call along with what the visit covers. Nothing is scheduled until you have the information you need to decide.
We are available every day from 5:30 AM to 10:30 PM, which covers early calls before a workday starts and evening calls when the house is quieter. Weekend scheduling works the same way as any other day.
Some electrical faults do not give you the option of waiting for a convenient appointment. A burning smell near an outlet, a panel that will not hold a reset, or a partial power loss that takes out part of the house are situations that need attention without delay. We take urgent calls alongside scheduled work. Ask what the schedule allows and we will tell you.
For occupied rentals and businesses that need to stay open, we work around the people in the space. Access is confirmed before the visit, and the scope is explained before anything is touched. Calls are answered here, and the work gets scheduled properly.
Electrical problems that happen on a schedule of their own are a different kind of job. A breaker that trips under load but holds fine when the circuit is light. A light that dims only when the air conditioner starts. An outlet that works most of the time but goes dead in wet weather. These faults are real, and they can be genuinely difficult to catch in the act.
Finding an intermittent fault means working backward from the symptom. That involves checking the circuit under the conditions that produce the problem, not just confirming that everything looks fine at rest. Loose connections, deteriorated insulation, a breaker that is failing rather than failed, and a grounding problem that only shows up under load are all things that can produce a symptom that comes and goes. None of them resolve on their own, and patching the visible end without tracing the source means the fault comes back.
We trace the fault. We fix the wiring. We restore the power.
Adding a large appliance, a hot tub, or a piece of workshop equipment means adding a dedicated circuit sized for the load that equipment actually draws. That starts with a panel capacity check. If the panel has room, we run the circuit, install the correct outlet or connection, and confirm the breaker is sized correctly for the draw. If the panel is already near capacity, that gets addressed before the circuit is run.
A hot tub or spa typically requires a 240-volt circuit with a disconnect installed nearby. A large shop tool or compressor may require the same. Getting the circuit right from the start means the equipment runs without nuisance tripping and without creating heat at connections.
Workshop wiring gets its own entry because the loads involved are different from household appliances. A welder draws a surge at startup that a standard circuit cannot handle cleanly. A compressor running in a detached garage needs a circuit that accounts for the full motor load, not just the running draw. We size and run these circuits to match the equipment, confirm the panel can carry the addition, and install the correct outlet and breaker so the work can start without electrical problems getting in the way.
An outdoor outlet that is not in a weatherproof enclosure is a code item and a safety issue. We install weatherproof receptacles and covers for patios, garages, detached structures, and any exterior location where an outlet is needed. GFCI protection is required at outdoor locations, and we confirm it is present and functioning as part of any outdoor outlet work.
Older homes in this part of San Bernardino County sometimes carry aluminum branch-circuit wiring or knob-and-tube wiring that was not designed for modern electrical loads. Aluminum wiring at outlets and switches loosens at connections over time, creating heat. Knob-and-tube is ungrounded and cannot be safely covered with insulation.
A full rewire replaces all branch-circuit wiring with new copper conductors, updates outlets and switches, and brings grounding and bonding up to current standards throughout. A partial rewire addresses the highest-risk circuits without touching sections that are already sound. Which approach fits a given home depends on the wiring's age, condition, and how the loads have changed since it was installed.
Panel location matters before a visit even begins. In a single-family home, the panel is usually in the garage, a utility room, or along an exterior wall. In an older home it may be in a hallway closet or a back bedroom. In a detached structure it may be in a subpanel fed from the main house. Knowing where the panel is and whether access is clear saves time on both ends.
A few things make a visit go smoothly. The panel should be accessible, which means not blocked by stored items or locked behind a door without a key on hand. Any outlets, fixtures, or switches involved in the job should be pointed out before work starts. If the panel is in a garage, having the garage accessible from the start avoids a delay.
We protect floors and finishes while we work. If the job runs through a finished room, we treat it that way. What a job like this usually involves is described on the page that lists our electrical services.
Rental property electrical work has a different set of logistics. The person who calls is usually not the person who lives in the unit. Access has to be arranged in advance, and the tenant's schedule is part of the picture. We confirm access before the visit, not on the day of.
After the work is done, the landlord or property manager gets a clear account of what was found, what was repaired, and what was left as a note for the record. That matters when a unit goes back on the market or when a future inspection asks about prior electrical work.
A unit that has not had electrical work done in years may have GFCI protection missing in kitchens and bathrooms, ungrounded outlets throughout, or a panel that does not meet current standards. An electrical inspection before a new tenancy identifies those items. We document what we find, explain what it means, and give you a repair scope that addresses the actual risk.
For landlords managing several properties in the Highland area, we handle the work property by property, confirm the scope on each call, and keep the process straightforward from booking to completion. No pressure and no gimmicks, just safe, solid wiring.
The price for a job is given on the call, before anything is scheduled. You describe what you are seeing or what you need, we scope the work, and you get the rate before a visit is confirmed. If the job requires a site visit to firm up the number, that is explained on the call along with what the visit covers.
What moves a quote is the nature of the fault, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change. A simple outlet replacement on a circuit that is otherwise sound is a different job from the same outlet replacement on a circuit where the wiring behind it is deteriorated. A new circuit on a panel with room is a different job from the same circuit on a panel that is already at capacity.
No-pressure estimates, priced up front. You get the scope and the number before you decide. That is the only commitment the call requires.
We serve Highland and the surrounding area across San Bernardino County. That includes Redlands, Mentone, Loma Linda, Running Springs, and San Bernardino. If you are in any of these communities and need electrical work scheduled, call and we will confirm coverage at your address.
The work in this part of the county reflects what the region's housing stock and climate actually produce. Panels that were sized for lighter loads getting pushed by air conditioning and added appliances. Older homes with wiring that has not been touched in decades. Growing demand for EV charger circuits, solar interconnection work, and backup generator hookups as the region's residential energy picture changes. We handle all of it, and the work is done to the code inspectors in this area enforce.
We answer the phone. We book the work. We keep it simple.
Yes. We confirm access with the tenant before the visit and work around the occupant's schedule where possible. The scope is explained before anything is touched, and the landlord or property manager gets a record of what was found and what was done after the job is complete.
Yes. Surface raceway is a code-compliant way to run wiring in finished spaces where cutting into walls is not practical or would cause too much disruption. It is commonly used in commercial spaces and in older homes with plaster walls. We confirm whether it is the right approach for your situation on the call.
Older homes in this part of San Bernardino County often carry wiring that was installed for the lighter electrical loads of an earlier era. That can mean ungrounded outlets, missing GFCI protection in required locations, or a panel that has not been sized for the circuits the home now runs. An inspection identifies where the gaps are so repairs can be targeted to the actual risk rather than worked through at random.
The electrical side is our work. Running the dedicated circuit, installing the disconnect, and confirming the panel has the capacity to carry the load are all electrical tasks we handle. The heating or cooling equipment itself, including installation and service of the unit, is handled by an HVAC contractor.
Equipment that cannot tolerate a sudden power loss, such as a desktop computer or a network switch, should be shut down properly before the circuit is de-energized. We confirm the shutdown scope on the call so you know which circuits will be affected and can prepare the equipment in that area before the visit.
Describe the job, get the price, and decide from there. We take calls from 5:30 AM to 10:30 PM every day of the week, and we take urgent calls alongside scheduled work.
Call (442) 419-3289 to get started. We handle the rest.
Take a look at our full service area. Also serving: Redlands, Loma Linda, San Bernardino, Yucaipa.
From a dead outlet to a full panel replacement, we handle the electrical work that keeps homes and businesses in Highland running safely. Call us, describe the job, and you get a price before anything is scheduled. We are open 5:30 AM to 10:30 PM, seven days a week, and we take urgent calls alongside scheduled work.
| Type of Work | What's Included | Ideal For | What to Keep in Mind |
|---|---|---|---|
| Whole-Home Surge Protection |
| Homes with electronics, appliances, or equipment vulnerable to voltage spikes | Summer storm activity in the high desert can send voltage spikes through the lines. Installing surge protection at the panel level covers every circuit in the home at once. |
| Electrical Panel & Service Upgrades |
| Homes adding major appliances, EV chargers, solar systems, or running near panel capacity | A load calculation before the upgrade confirms the right panel size for what the home actually draws, not just what it drew years ago. |
| EV Charger Installation |
| Homeowners adding a Level 2 charger in a garage or businesses adding charging for customers or tenants | If the panel is near capacity, we address that first so the charger operates safely and reliably from day one. |
Call (442) 419-3289 to describe the job, get a price, and get it on the schedule. We are available 5:30 AM to 10:30 PM, seven days a week.
(442) 419-3289